46
Total 1 MAC Group(s).
Router port(s):total 1 port.
GE1/0/1 (D)
IP group(s):the following ip group(s) match to one mac group.
IP group address:224.1.1.1
(0.0.0.0, 224.1.1.1):
Host port(s):total 1 port.
GE1/0/3 (D)
MAC group(s):
MAC group address:0100-5e01-0101
Host port(s):total 1 port.
GE1/0/3
Multicast source and user control policy configuration
example
Network requirements
As shown in
, Switch A is a Layer-3 switch. IGMPv2 runs on Switch A and IGMPv2
snooping runs on Switch B. Multicast sources and hosts run 802.1X client.
Perform the following tasks to meet the requirements:
•
To block multicast traffic from Source 2 to group 224.1.1.1, configure a multicast source control
policy on Switch A.
•
To make sure Host A can join or leave only multicast group 224.1.1.1, configure a multicast user
control policy on Switch B.
Figure 18 Network diagram
Configuration procedures
1.
Assign an IP address and subnet mask to each interface according to
. (Details not
shown.)
2.
Configure Switch A:
# Create VLAN 101 through VLAN 104, and assign GigabitEthernet 1/0/1 through
GigabitEthernet 1/0/4 to the four VLANs respectively.
