325
Setting the DSCP value for MLD messages
T
his configuration applies to only the MLD messages that the local switch generates
when the switch
or its port acts as a member host,
rather than those forwarded ones.
To set the DSCP value for MLD messages:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter MLD-snooping view.
mld-snooping
N/A
3.
Set the DSCP value for MLD
messages.
dscp
dscp-value
By default, the DSCP value in
MLD messages is 48.
Displaying and maintaining MLD snooping
Task Command
Remarks
Display MLD snooping group
information.
display mld-snooping group
[ [
vlan
vlan-id
] [
slot
slot-number
] [
verbose
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view.
Display information about the
hosts tracked by MLD snooping.
display mld-snooping host vlan
vlan-id
group
ipv6-group-address
[
source
ipv6-source-address
]
[
slot
slot-number
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view.
Display IPv6 static multicast MAC
address entries.
display mac-address
[
mac-address
[
vlan
vlan-id
] |
[
multicast
] [
vlan
vlan-id
]
[
count
] ] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view.
Display statistics for MLD
messages learned through MLD
snooping.
display mld-snooping statistics
[
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view.
Remove dynamic group entries of
a specified MLD snooping group
or all MLD snooping groups.
reset mld-snooping group
{
ipv6-group-address
|
all
} [
vlan
vlan-id
]
Available in user view.
This command works only on an
MLD snooping–enabled VLAN,
but not in a VLAN with MLD
enabled on its VLAN interface.
This command cannot remove the
static group entries of MLD
snooping groups.
Clear statistics for all MLD
messages learned through MLD
snooping.
reset mld-snooping statistics
Available in user view.
