HPE 5820X Series Configuration Manual Download Page 52

Page: 52 / 512

[SwitchA-GigabitEthernet1/0/3] quit

Configure Switch B:
# Enable IGMP snooping globally.

<SwitchB> system-view

[SwitchB] igmp-snooping

[SwitchB-igmp-snooping] quit

# Create VLAN 100, assign GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 to this VLAN, and
enable IGMP snooping in the VLAN.

[SwitchB] vlan 100

[SwitchB-vlan100] port gigabitethernet 1/0/1 gigabitethernet 1/0/2

[SwitchB-vlan100] igmp-snooping enable

[SwitchB-vlan100] quit

Configure Switch C:
# Enable IGMP snooping globally.

<SwitchC> system-view

[SwitchC] igmp-snooping

[SwitchC-igmp-snooping] quit

# Create VLAN 100, assign GigabitEthernet 1/0/1 through GigabitEthernet 1/0/5 to this VLAN,
and enable IGMP snooping in the VLAN.

[SwitchC] vlan 100

[SwitchC-vlan100] port gigabitethernet 1/0/1 to gigabitethernet 1/0/5

[SwitchC-vlan100] igmp-snooping enable

[SwitchC-vlan100] quit

# Configure GigabitEthernet 1/0/3 and GigabitEthernet 1/0/5 as static member ports for
multicast group 224.1.1.1.

[SwitchC] interface GigabitEthernet 1/0/3

[SwitchC-GigabitEthernet1/0/3] igmp-snooping static-group 224.1.1.1 vlan 100

[SwitchC-GigabitEthernet1/0/3] quit

[SwitchC] interface GigabitEthernet 1/0/5

[SwitchC-GigabitEthernet1/0/5] igmp-snooping static-group 224.1.1.1 vlan 100

[SwitchC-GigabitEthernet1/0/5] quit

Verifying the configuration

# Display detailed IGMP snooping group information in VLAN 100 on Switch A.

[SwitchA] display igmp-snooping group vlan 100 verbose

Total 1 IP Group(s).

Total 1 IP Source(s).

Total 1 MAC Group(s).

Port flags: D-Dynamic port, S-Static port, C-Copy port, P-PIM port

Subvlan flags: R-Real VLAN, C-Copy VLAN

Vlan(id):100.

Total 1 IP Group(s).

Total 1 IP Source(s).

Total 1 MAC Group(s).

Router port(s):total 2 port.

GE1/0/1 (D) ( 00:01:30 )

GE1/0/3 (S)

IP group(s):the following ip group(s) match to one mac group.

Summary of Contents for 5820X Series

































































































































































































































































































































































































































































































































Search results

Summary of Contents for 5820X Series

Reviews:

Related manuals for 5820X Series

Brands by name

Popular brands

HPE 5820X Series, Configuration Manual

Search results

Summary of Contents for 5820X Series

Reviews:

Related manuals for 5820X Series

Brands by name

Popular brands