manualshive.com logo in svg

HP Xw460c - ProLiant - Blade Workstation, User Manual, Page: 18 / 235

Share
Download
HP Xw460c - ProLiant - Blade Workstation User Manual Download Page 18

 

iLO 2 setup  18 

Connecting to the network 

Typically iLO 2 is connected to the network in one of two ways. iLO 2 can be connected through a: 

•

 

Corporate network

 where both ports are connected to the corporate network. In this configuration, 

the server has two network ports (one server NIC, and one iLO 2 NIC) connected to a corporate 
network.  

 

•

 

Dedicated management

 network where the iLO 2 port is on a separate network. 

 

 

 

Configuring the IP address 

This step is necessary only if you are using a static IP address. When using dynamic IP addressing, your 

DHCP server will automatically assign an IP address for iLO 2. HP recommends using DNS or DHCP with 

iLO 2 to simplify installation 

Summary of Contents for Xw460c - ProLiant - Blade Workstation












































































































































































































































Reviews:

No comments