HPQLOMIG directory migration utility 174
NOTE:
The installation utility will present an error message and exit if it detects that the .NET
Framework is not installed.
Using HPQLOMIG
The HPQLOMIG utility automates the process of migrating management processors by creating objects in
the directory corresponding to each management processor and associating them to a role. HPQLOMIG
has a GUI and provides the user with a wizard approach to implementing or upgrading large amounts of
management processors.
Finding management processors
The first step to migrating is to discover all management processors you want to enable for directory
services. You can search for management processors using DNS names, IP addresses, or IP address
wildcards. The following rules apply to the variables entered in the Addresses field:
•
DNS names, IP addresses, and IP address wildcards must be delimited with a semicolon.
•
The IP address wildcard uses the "*" character in the third and fourth octet fields. For example, IP
address 16.100.*.* is valid, whereas IP address 16.*.*.* is not.
•
Ranges can also be specified using a hyphen. For example, 192.168.0.2-10 is a valid range. A
hyphen is only supported in the rightmost octet.
•
After you click
Find
, HPQLOMIG begins pinging and connecting to port 443 (the default SSL port).
The purpose of these actions is to quickly determine if the target network address is a management
processor. If the device does not respond to the ping or connect appropriately on port 443, then it is
determined not to be a management processor.