Parameter Tables
6-32
ip access table parameters
ip access table parameters
ip access table parameters
ip access table parameters
When creating table entries, you may either specify the argument name followed by argument value or simply entering the
argument value. When only the argument value is specified, then enter the values in the order depicted by the following table.
CLI applies default values to the omitted arguments. Due to the nature of the information, the only argument that can be
omitted is the “comment” argument.
snmp table host table parameters
snmp table host table parameters
snmp table host table parameters
snmp table host table parameters
When creating table entries, you may either specifying the argument name followed by argument value. CLI applies default
values to the omitted arguments. Due to the nature of the information, the only argument that can be omitted is the “comment”
argument.
telnet parameters
telnet parameters
telnet parameters
telnet parameters
serial port parameters
serial port parameters
serial port parameters
serial port parameters
name
name
name
name
type
type
type
type
values
values
values
values
access
access
access
access
cli parameter
cli parameter
cli parameter
cli parameter
IP Access Table
Table
N/A
R
mgmtipaccesstbl
Table Index
Integer
User Defined
N/A
index
IP Address
IpAddress
User Defined
RW
ipaddr
IP Mask
IpAddress
User Defined
RW
ipmask
Comment (optional)
DisplayString
User Defined
RW
cmt
Status (optional)
Integer
enable
disable
delete
RW
status
name
name
name
name
type
type
type
type
values
values
values
values
access
access
access
access
cli parameter
cli parameter
cli parameter
cli parameter
SNMP Trap Host Table
Table
N/A
R
snmptraphosttbl
Table Index
Integer
User Defined
N/A
index
IP Address
IpAddress
User Defined
RW
ipaddr
Password
DisplayString
User Defined
W
passwd
Comment (optional)
DisplayString
User Defined
RW
cmt
Status (optional)
Integer
enable
disable
delete
RW
status
name
name
name
name
type
type
type
type
values
values
values
values
access
access
access
access
cli parameter
cli parameter
cli parameter
cli parameter
Telnet
Group
N/A
R
telnet
Telnet Management Interface
Bitmask
Interface Bitmask
0 - no interfaces (disable)
1 - Ethernet
4 - Wireless A
8- Wireless B
15 - all interfaces
RW
telifbitmask
Telnet Port
Integer
User Defined
23 (default)
RW
telport
Telnet Login Inactivity Time-out Integer
1 – 60 seconds
30 sec (default)
RW
tellogintout
Telnet Session Idle Time-out
Integer
1 - 900 seconds
900 sec (default)
RW
telsessiontout
name
name
name
name
type
type
type
type
values
values
values
values
access
access
access
access
cli parameter
cli parameter
cli parameter
cli parameter
Serial
Group
N/A
R
serial
Baud Rate
Integer
2400, 4800,
9600 (default),
19200, 38400, 57600
RW
serbaudrate
Data Bits
Integer
8
R
serdatabits
Parity
Integer
none
R serparity
Stop Bits
Integer
1
R
serstopbits
Flow Control
Value
none (default)
xon/xoff
RW
serflowctrl
