Management Settings
4-9
managing ip access
managing ip access
managing ip access
managing ip access
Figure 4-8
Figure 4-8
Figure 4-8
Figure 4-8
IP Access Table Configuration Screen
IP Access Table Configuration Screen
IP Access Table Configuration Screen
IP Access Table Configuration Screen
The Management IP Access table is used to specify a station or stations that are authorized to manage the WL520 device
through available management services (SNMP, HTTP [Web], and Telnet [CLI]). To configure this table, click Add
Add
Add
Add and set the
following parameters:
–
IP Address
IP Address
IP Address
IP Address
. Enter the IP Address for the management station.
–
IP Mask
IP Mask
IP Mask
IP Mask
. Enter a mask that will act as a filter to limit access to a range of IP Addresses.
–
Comment
Comment
Comment
Comment
. Enter an optional comment such as the station name.
NOTE:
The IP mask 255.255.255.255 would authorize the single station defined by the IP Address to configure the Access
Point device. The Access Point device would ignore commands from any other IP address. In contrast, the IP mask
255.255.255.0 would authorize anyone on the subnet shared by the IP Address
anyone on the subnet shared by the IP Address
anyone on the subnet shared by the IP Address
anyone on the subnet shared by the IP Address to configure the Access Point device.
To edit or delete an entry, click
Edit
Edit
Edit
Edit
. Edit the information, or select
Enable
Enable
Enable
Enable
,
Disable
Disable
Disable
Disable
, or
Delete
Delete
Delete
Delete
from the
Status
pull-down menu.
