manualshive.com logo in svg

HP Vectra VLi 8, Supplementary Manual

Share
Download
HP Vectra VLi 8 Supplementary Manual Download Page 75

75

2   How to Install and Replace Components In Your Desktop PC

Replacing a Power Protection Device

Replacing a Power Protection Device

WARNING

For your safety, never remove the PC’s cover without first removing 
the power cord from the power outlet and any connection to a 
telecommunications network. If a power protection device is fitted to 
your PC, you must remove the power cord then wait for a complete 
shutdown of your system before removing the cover. Remove the 
power protection device cables before any servicing operation. Always 
replace the cover before switching the PC on again.

1

Remove the computer’s cover and front panel (described in 
this chapter).

2

Remove the power alert and passthru cables from the power 
protection device, and from the power supply unit and system board.

For more information, refer to the 

Installation Guide 

that comes 

with this device.

Summary of Contents for Vectra VLi 8











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands