manualshive.com logo in svg

HP Vectra VLi 8, Supplementary Manual

Share
Download
HP Vectra VLi 8 Supplementary Manual Download Page 73

73

2   How to Install and Replace Components In Your Desktop PC

Changing the Battery

Changing the Battery

WARNING

There is a danger of explosion if the battery is incorrectly installed. For 
your safety, never attempt to recharge, disassemble, or burn the old 
battery. Replace the battery only with the same or equivalent type 
recommended by the manufacturer. The battery in this PC is a lithium 
battery which does not contain heavy metals, nevertheless, in order to 
protect the environment, do not dispose of batteries in household 
waste. Please return used batteries to the shop from which you bought 
them, or to the dealer from which you purchased your PC, or to HP, so 
that they can either be recycled or disposed of in an environmentally 
sound way. Returned used batteries will be accepted free of charge.

You should order replacement battery HP 1420-0356 from your local 
Sales and Service office, or a “CR2032 type” battery, which is available 
from most local stores. 

1

Remove the computer’s cover (described in this chapter).

position of battery

Summary of Contents for Vectra VLi 8











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands