HP Vectra VLi 8, Supplementary Manual

Page: 101 / 138

101
3 How to Install and Replace Components In Your Minitower PC
Installing Accessory Boards
8 The accessory board may need a special connection, such as:
•
WOL (Wake on LAN) connector to the network card (not
necessary with PCI 2.2-compliant network cards).
• CD-ROM drive to the sound board (if you no longer want to use
the integrated audio).
For more information, refer to the documentation that came with
the accessory board. The necessary cables are usually provided with
the accessory board.
NOTE If you install a network board and connect it to the WOL connector, you
must enable the
Suspend Wake-Up/Integrated Network
a nd/or
Integrated Network
fields in the Power menu of the PC’ s Setup
program. This only applies if the network board supports these modes.
To enter the
Setup
program, press
F2
during startup.
If you install an add-on sound board (and you no longer want to use the
integrated audio), you must set the
Integrated Audio Interface
in
the
Advanced
menu of the Setup program to
Disabled
.
9 Replace the cover (described in this chapter).
WOL Connector
Integrated Audio
Connector
If you install an add-on sound
board, remove the cable in
this connector and insert it
into the sound board’s
connector.