manualshive.com logo in svg

HP Synergy 480 Gen9, Maintenance And Service Manual, Page: 4 / 71

Share
Download
HP Synergy 480 Gen9 Maintenance And Service Manual Download Page 4

Removing and replacing a drive blank.............................................................................................. 32
Removing and replacing a drive........................................................................................................ 33
Removing and replacing an SFF flash adapter................................................................................. 33
Removing and replacing a compute module end cap....................................................................... 34
Removing and replacing the front panel/drive cage assembly.......................................................... 34
Removing and replacing a mezzanine option....................................................................................35
Removing and replacing a heatsink blank.........................................................................................35
Removing and replacing DIMM baffles..............................................................................................36
Removing and replacing DIMMs....................................................................................................... 37
Removing and replacing the HPE Smart Storage Battery.................................................................38
Removing and replacing a storage controller.................................................................................... 39
Removing and replacing a heatsink.................................................................................................. 39
Removing and replacing a processor................................................................................................ 41
Removing and replacing the drive backplane....................................................................................45
Removing and replacing the internal SATA board.............................................................................45
Removing and replacing the system battery..................................................................................... 46
Removing and replacing the mezzanine assembly........................................................................... 47
Removing and replacing the system board....................................................................................... 48
HP Trusted Platform Module............................................................................................................. 54
Dual 8Gb microSD Enterprise Midline USB device........................................................................... 54

Documentation and troubleshooting resources for HPE Synergy....... 55

HPE Synergy documentation............................................................................................................ 55

HPE Synergy Configuration and Compatibility Guide.............................................................55
HPE OneView User Guide for HPE Synergy..........................................................................55
HPE OneView Global Dashboard...........................................................................................55
HPE Synergy Image Streamer User Guide............................................................................ 55
HPE Synergy Image Streamer GitHub................................................................................... 55
HPE Synergy Software Overview Guide................................................................................ 55
Best Practices for HPE Synergy Firmware and Driver Updates............................................. 56
HPE OneView Support Matrix for HPE Synergy.....................................................................56
HPE Synergy Image Streamer Support Matrix....................................................................... 56
HPE Synergy Glossary........................................................................................................... 56

HPE Synergy troubleshooting resources...........................................................................................56

Troubleshooting within HPE OneView.................................................................................... 56
HPE Synergy Troubleshooting Guide.....................................................................................56
HPE Error Message Guide for HPE Synergy......................................................................... 57
HPE OneView and HPE OneView REST API scripting help.................................................. 57
HPE Synergy QuickSpecs...................................................................................................... 57

Component identification......................................................................... 58

Front panel LEDs and buttons...........................................................................................................58
Front panel components....................................................................................................................59

Serial label pull tab information...............................................................................................59

Drive numbering................................................................................................................................ 59
Hot-plug drive LED definitions........................................................................................................... 60
SFF flash adapter components and LED definitions......................................................................... 61
NVMe SSD components....................................................................................................................62
System board components................................................................................................................63

System maintenance switch................................................................................................... 63
Mezzanine connector definitions............................................................................................ 64
DIMM slot locations................................................................................................................ 65
Components........................................................................................................................... 66
LEDs....................................................................................................................................... 66

4

Contents

Summary of Contents for Synergy 480 Gen9








































































Reviews:

No comments