HP Synergy 480 Gen9, Maintenance And Service Manual, Page: 49 / 71

3. Place the compute module on a flat, level work surface.
4. Remove the access panel .
5. Remove all drives .
6. Remove all drive blanks .
7. Remove the front panel/drive cage assembly .
8. Remove the internal USB drive, if installed. To locate the internal USB connector, see " System board
components ."
9. Remove the microSD card, if installed. To locate the microSD card, see " System board components ."
10. Remove all DIMM baffles .
11. Remove all DIMMs .
12. Remove all mezzanine cards .
13. Remove the heatsink .
14. Open each of the processor locking levers in the order indicated, and then open the processor retaining
bracket.
1
2
3
15. Remove the processor from the processor retaining bracket.
Removal and replacement procedures 49