manualshive.com logo in svg

HP Synergy 480 Gen9, Maintenance And Service Manual, Page: 54 / 71

Share
Download
HP Synergy 480 Gen9 Maintenance And Service Manual Download Page 54

Warning: The Product ID should ONLY be modified by qualified service
personnel. This value should always match the Product ID located on the
chassis.

7.

Enter the product ID and press the 

Enter

 key.

8.

To confirm exiting System Utilities, press the 

F10 

key.

9.

The compute module automatically reboots.

HP Trusted Platform Module

The TPM is not a customer-removable part.

CAUTION:

Any attempt to remove an installed TPM from the system board breaks or disfigures the TPM security
rivet. Upon locating a broken or disfigured rivet on an installed TPM, administrators should consider the
system compromised and take appropriate measures to ensure the integrity of the system data.

If you suspect a TPM board failure, leave the TPM installed and 

remove the system board

. Contact a

Hewlett Packard Enterprise authorized service provider for a replacement system board and TPM board.

Dual 8Gb microSD Enterprise Midline USB device

This compute module supports the installation of the Dual 8Gb microSD Enterprise Midline USB device on the
compute module internal USB connector.

This USB storage device contains a dual-SD card module that supports up to two SD, SDHC, or SDXC
storage cards providing data redundancy through a mirrored RAID-1 configuration. This USB storage device
connects to an internal USB connector and is configured upon boot.

To locate the internal USB connector, see "

System board components

." For more information, see the Dual

8Gb microSD EM USB storage device documentation on the 

Hewlett Packard Enterprise website

.

54

 HP Trusted Platform Module

Summary of Contents for Synergy 480 Gen9








































































Reviews:

No comments