HP Synergy 480 Gen9, Maintenance And Service Manual, Page: 37 / 71

6. Remove the Smart Storage Battery from the DIMM baffle, if installed.
To replace the component, reverse the removal procedure.
Removing and replacing DIMMs
CAUTION:
To prevent improper cooling and thermal damage, always install DIMMs of the same height on the
compute module. This compute module does not support mixing standard and non-standard height
DIMMs.
To identify the DIMMs installed in the compute module, see "DIMM identification."
To remove the component:
Procedure
1. Power down the compute module .
2. Remove the compute module .
3. Place the compute module on a flat, level work surface.
4. Remove the access panel .
5. Remove all DIMM baffles .
6. Remove the DIMM.
Removing and replacing DIMMs 37