8.
Install the processor socket cover onto the processor socket of the failed system board.
9.
Clean the old thermal grease from the heatsink and the top of the processor with the alcohol swab. Allow
the alcohol to evaporate before continuing.
10.
Apply all the grease to the top of the processor in the following pattern to ensure even distribution.
11.
Install the heatsink.
12. Remove all mezzanine cards
.
.
15. Install the internal USB drive
16. Install the front panel/drive cage assembly
.
.
.
.
20. Install the compute module
After you replace the system board, you must re-enter the compute module serial number and the product ID:
1.
During the compute module startup sequence, press the
F9
key to access UEFI System Utilities.
2.
Select
System Configuration
>
BIOS/Platform Configuration (RBSU)
>
Advanced Options
>
Advanced System ROM Options
>
Serial Number
, and then press the
Enter
key.
3.
Enter the serial number and press the
Enter
key.
The following message appears:
The serial number should only be modified by qualified service personnel. This
value should always match the serial number located on the chassis.
4.
To clear the warning, press the
Enter
key.
5.
Enter the serial number and press the
Enter
key.
6.
Select
Product ID
.
The following warning appears:
Removal and replacement procedures
53
Summary of Contents for Synergy 480 Gen9
Page 23: ...Customer self repair 23 ...
Page 24: ...24 Customer self repair ...
Page 25: ...Customer self repair 25 ...
Page 26: ...26 Customer self repair ...