HP Synergy 480 Gen9, Maintenance And Service Manual, Page: 36 / 71

Procedure
1. Power down the compute module .
2. Remove the compute module .
3. Place the compute module on a flat, level work surface.
4. Remove the access panel .
5. Remove the heatsink blank. Retain the heatsink blank for future use.
To replace the component, reverse the removal procedure.
Removing and replacing DIMM baffles
Procedure
1. Power down the compute module.
2. Remove the compute module .
3. Place the compute module on a flat, level work surface.
4. Remove the access panel .
IMPORTANT:
When removing the right DIMM baffle, leave the Smart Storage Battery installed on the baffle. Use
the blue pull tab to disconnect the Smart Storage Battery cable from the system board.
5. Remove one or more DIMM baffles.
36 Removing and replacing DIMM baffles