CAUTION:
To avoid damage to the processor, do not touch the bottom of the processor, especially the contact
area.
To replace the component:
CAUTION:
To avoid damage to the system board, processor socket, and screws, do not overtighten the heatsink
screws.
1.
Install the processor. Verify that the processor is fully seated in the processor retaining bracket by visually
inspecting the processor installation guides on either side of the processor.
THE PINS ON THE SYSTEM
BOARD ARE VERY FRAGILE AND EASILY DAMAGED
.
Removal and replacement procedures
43
Summary of Contents for Synergy 480 Gen9
Page 23: ...Customer self repair 23 ...
Page 24: ...24 Customer self repair ...
Page 25: ...Customer self repair 25 ...
Page 26: ...26 Customer self repair ...