HP Synergy 480 Gen10 User Manual Download Page 53

Page: 53 / 124

Installing the SFF flash adapter option

CAUTION:

CAUTION: To prevent improper cooling and thermal damage, do not operate the compute module or the enclosure

unless all drive and device bays are populated with either a component or a blank.

Prequisites

The SFF flash adapter option is supported when any of the following components are installed:

HPE Dynamic Smart Array S100i Controller

HPE Smart Array E208i-c/P204i-c/P416ie-m Controller

HPE Synergy 3830C 16G FC HBA

HPE Synergy 3530C 16G FC HBA

Procedure

1. Remove the drive blank.

2. Install the uFF drives in the SFF flash adapter.

3. Install the SFF flash adapter by pushing firmly near the left-side adapter ejection handle until the latching spring engages in the

drive bay.

Installing the SFF flash adapter option

Summary of Contents for Synergy 480 Gen10





























































































































Search results

Summary of Contents for Synergy 480 Gen10

Reviews:

HP Synergy 480 Gen10, User Manual, Page: 53 / 124

Search results

Summary of Contents for Synergy 480 Gen10

Reviews: