HP Synergy 480 Gen10 User Manual Download Page 23

Page: 23 / 124

NVDIMM identification

NVDIMMs are supported only when first-generation Intel Xeon Scalable processors are installed on the compute module.

NVDIMM boards are blue instead of green. This change to the color makes it easier to distinguish NVDIMMs from DIMMs.

To determine NVDIMM characteristics, see the full product description as shown in the following example:

Item

Description

Definition

Capacity

16 GiB

Rank

1R (Single rank)

Data width per DRAM chip x4 (4 bit)

Memory type

NN4=DDR4 NVDIMM-N

Maximum memory speed

2667 MT/s

Speed grade

V (latency 19-19-19)

DIMM type

RDIMM (registered)

Other

—

For more information about NVDIMMs, see the product QuickSpecs on the Hewlett Packard Enterprise website
(https://www.hpe.com/info/qs

https://www.hpe.com/info/qs).

NVDIMM identification

Summary of Contents for Synergy 480 Gen10





























































































































Search results

Summary of Contents for Synergy 480 Gen10

Reviews:

HP Synergy 480 Gen10, User Manual, Page: 23 / 124

Search results

Summary of Contents for Synergy 480 Gen10

Reviews: