manualshive.com logo in svg

HP Synergy 480 Gen10, User Manual, Page: 2 / 124

Share
Download
HP Synergy 480 Gen10 User Manual Download Page 2

HPE Synergy 480 Gen10 Compute Module User Guide

HPE Synergy 480 Gen10 Compute Module User Guide

Abstract

Abstract

This document is for the person who installs, administers, and troubleshoots the HPE Synergy system. Hewlett Packard Enterprise assumes
you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels.

Part Number: 30-AAD7A7A0-008
Published: June 2021
Edition: 8

© Copyright 2017-2021 Hewlett Packard Enterprise Development LP

Notices

Notices

The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as
constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained
herein.

Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession, use, or copying. Consistent with FAR
12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed
to the U.S. Government under vendor's standard commercial license.

Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard Enterprise has no control over and is
not responsible for information outside the Hewlett Packard Enterprise website.

Acknowledgments

Acknowledgments

Intel , Itanium , Optane , Pentium , Xeon , Intel Inside , and the Intel Inside logo are trademarks of Intel Corporation in the U.S. and other
countries.

AMD and the AMD EPYC  and combinations thereof are trademarks of Advanced Micro Devices, Inc.

Microsoft  and Windows  are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Adobe  and Acrobat  are trademarks of Adobe Systems Incorporated.

Java  and Oracle  are registered trademarks of Oracle and/or its affiliates.

UNIX  is a registered trademark of The Open Group.

All third-party marks are property of their respective owners.

®

®

™

®

®

®

™

®

®

®

®

®

®

®

Summary of Contents for Synergy 480 Gen10





























































































































Reviews:

No comments