HP Synergy 480 Gen10 User Manual Download Page 123

Page: 123 / 124

Regulatory information

To view the regulatory information for your product, view the Safety and Compliance Information for Server, Storage, Power,

Networking, and Rack Products, available at the Hewlett Packard Enterprise Support Center:

https://www.hpe.com/support/Safety-Compliance-EnterpriseProducts

Additional regulatory information

Hewlett Packard Enterprise is committed to providing our customers with information about the chemical substances in our products as

needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European Parliament and the Council). A

chemical information report for this product can be found at:

https://www.hpe.com/info/reach

For Hewlett Packard Enterprise product environmental and safety information and compliance data, including RoHS and REACH, see:

https://www.hpe.com/info/ecodata

For Hewlett Packard Enterprise environmental information, including company programs, product recycling, and energy efficiency, see:

https://www.hpe.com/info/environment

Regulatory information 123

Summary of Contents for Synergy 480 Gen10





























































































































Search results

Summary of Contents for Synergy 480 Gen10

Reviews:

HP Synergy 480 Gen10, User Manual, Page: 123 / 124

Search results

Summary of Contents for Synergy 480 Gen10

Reviews: