HP StoreOnce B6000 User Manual Download Page 62

Page: 62 / 153

Partner Appliances (Replication)

The Partner Appliances tab shows you the replication status of all Target and Source HP StoreOnce
Backup Systems that have been configured for use with this HP StoreOnce Backup System.

There are three tabs; one for Target Appliances and one for Source Appliances, and a separate
tab for setting Source Appliance permissions.

Look at the bottom of the page to find information about any blackout windows that apply to the
selected appliance.

Target Appliances tab

The Target Appliances tab allows you to add, edit and remove Target Appliance details.

NOTE:

Although you can add Target Appliances on this page, it is not necessary to do so before

mapping configurations because this option is also available when running the Replication wizard.

Summary Appliance details

The following status details are shown for both Target and Source appliances.

Table 21 Summary Appliance details

The name of the appliance.

Appliance Name

The health of the appliance; this shows you whether the appliance is running.

Appliance Status

The virtual IP address of the appliance.

Appliance Address

The serial number of the appliance.

Serial number

The amount of free space on the appliance.

Free space

Whether the appliance is online.

Online

The protocol of the appliance software.

Protocol version

Replication

Summary of Contents for StoreOnce B6000


























































































































































Search results

Summary of Contents for StoreOnce B6000

Reviews:

Related manuals for StoreOnce B6000

Brands by name

Popular brands

HP StoreOnce B6000, User Manual

Search results

Summary of Contents for StoreOnce B6000

Reviews:

Related manuals for StoreOnce B6000

Brands by name

Popular brands