3.
The default values for the Command and Data Protocol Port Numbers are usually acceptable,
but may be edited if there is a conflict. (If replication needs to take place through a firewall,
the network administrator will need to open (TCP) ports 9387 (Command protocol) and 9388
(Data protocol).)
4.
Click
Add Target Appliance
.
To edit or remove a Target Appliance (administrators only)
•
Select the appliance and click
Edit
to edit the Appliance Name, IP address and protocol port
details of the target appliance.
•
Select the appliance and click
Delete
to remove an appliance from the list of Target Appliances
available to that source.
Run Traceroute
Click
Run Traceroute
to check that the local appliance can communicate with the target appliance
and identify the number of hops and latency in the routing.
Source Appliances tab
If the HP StoreOnce Backup System also has Replication-Target libraries, there may be multiple
Source Appliances.
NOTE:
Source Appliances are appliances that have added the local appliance or service set as
a Target Appliance. Only Source Appliances that are currently connected to the Target Appliance
are listed.
The Source Appliances tab is not editable.
Table 23 Source appliance parameters
Source Appliance tab
No fields are editable.
This is the name of the Source Appliance.
Appliance Name
The product class of the appliance, such as HP D2D4324.
Product Class
This is the IP address of the Source Appliance.
Appliance Address
This is the serial number of the Source Appliance.
Serial Number
This field indicates whether the Source Appliance is available.
Available
This shows the capacity of the Source Appliance.
Capacity
This shows the amount of free space on the Source Appliance.
Free Space
This shows the software version of the Source Appliance.
software version
Any blackout windows that have been specified will be reflected in this weekly calendar.
During these times, the selected Source Appliance is not available for replication.
Blackout windows
Source Appliance Permissions tab
The Source Appliance Permissions tab allows you to lock down the ability to create share and
library mappings so that when the wizard is run and mappings are configured, the Target only
has access to a list of sources that are allowed to replicate to it.
Source Appliance Permissions are disabled by default. In this state, there is no control over mapping
between share and library devices on the Target and the Source Appliances.
64
Replication
