1.
Display the Bandwidth Limiting Windows tab.
2.
Check the
General Limiting Enabled
box. You can now work out the recommended general
bandwidth limit, which is a simple calculation of:
(Max WAN Speed) x (Max Desired WAN Usage%).
A bandwidth limit calculator is provided on this page to work out limit values, if required.
3.
Click
Edit
to edit the Bandwidth Limiting Windows.
You can configure two windows for each day.
Be sure to check the appropriate Apply First/Second Restriction checkbox(es). This ensures
the times that have been specified are enabled. If it is not checked, the times are ignored.
Then enter the general value you have just calculated for the Recommended Limit in each
required window manually.
NOTE:
All settings are applied to the HP StoreOnce Backup System — you cannot configure
settings for individual jobs. The Bandwidth Limit windows override the General Limit when the
time specified for the window is active. Outside of Bandwidth Limit windows the General Limit
applies.
4.
Click
Apply
.
50
HP StoreOnce Catalyst