Click on an appliance to view more detailed status information in the bottom half of the screen,
as described in the following table.
Table 22 Target appliance parameters
Target Appliance tab
Some fields are editable.
This is the name that is used to identify the Target Appliance. You specify it on the Local
Appliance tab of the partner appliance.
Appliance Name
The product class of the appliance, such as HP B6000.
Product Class
This is the IP address of the Target Appliance. You specify it when you add the Target
Appliance and may edit it later.
Appliance Address
This is the serial number of the Target Appliance; it cannot be edited.
Serial Number
This is the port number that will be used for command protocol.
Command Protocol Port
Number
This is the port number that will be used for data protocol.
Data Protocol Port
Number
This field indicates whether the Target Appliance is available.
Available
This identifies the replication protocol in use.
Replication protocol
The amount of user data stored on the Target Appliance.
User Data Stored
This shows the capacity of the Target Appliance.
Capacity
This shows the amount of free space on the Target Appliance.
Free Space
This shows the software version of the Target Appliance.
Software version
This shows the current system time.
System Time
This shows whether a blackout window is currently active. This means no replication will
occur.
Blackout window active
Any blackout windows that have been specified will be reflected in this weekly calendar.
During these times, the selected Target Appliance is not available for replication.
Blackout windows
Administrators may edit and delete blackout windows from here or from the
Local Settings
tab.
To add a target appliance (administrators only)
1.
Click
Add Target Appliance
.
Figure 2 Create new target appliance
2.
Enter the
Target Appliance Address
.
Partner Appliances (Replication)
63