Overview
25
Director 2/64 Installation Guide
Figure 1: Director components—front
CTP2 Card
The Director 2/64 ships with two Control Processor (CTP2) cards. The active
CTP2 card initializes and configures the director after power on, and contains the
microprocessor and associated logic that coordinate director operation. The
second CTP2 card serves as a backup. A CTP2 card provides an Initial Machine
Load (IML) button on the faceplate. When the button is pressed and held for three
seconds, the director reloads firmware and resets the CTP2 card without switching
off power or affecting operational fiber-optic links.
Each CTP2 card also provides a 10/100 megabit per second (Mbps) RJ-45 twisted
pair connector on the faceplate that attaches to an Ethernet Local Area Network
(LAN).
1
Power and system error LEDs
2
UPM cards
3
Power supplies
4
Cable management assembly
1
5
Front bezel
6
CTP2 cards
1. Provided in rack-mount kits HP 9000, HP 10000, and HP 11000 Series
only.
