HP StorageWorks Director 2/64 Installation Manual Download Page 113

Page: 113 / 146

Installing and Configuring the Director

113

Director 2/64 Installation Guide

■

512 MB or greater RAM.

■

Video card supporting 256 colors at 800 x 600 pixel resolution.

■

Ethernet network adapter.

■

Java-enabled Internet browser, such as Microsoft Internet Explorer (Version
4.0 or later) or Netscape Navigator (Version 4.6 or later).

Installing HAFM Client on a Remote Workstation

Use these steps to install HAFM on a remote client:

1. Verify the workstation and the Ethernet LAN segment (with the Director

attached) are connected through the Internet.

2. At the workstation, launch the browser application.

3. At the browser, enter the HAFM appliance IP address.

4. The HAFM splash screen displays with the following options, see

Figure 61

Install HAFM remote client application—Choose this option to install
the application for your workstation platform.

Download SNMP MIB files—The Management Information Base (MIB)
files are provided in standard ASN.1 syntax and may be installed into the
MIB database of any SNMPv2 compliant Network Management Station.

Figure 61: HAFM remote client install

Summary of Contents for StorageWorks Director 2/64



















































































































































Search results

Summary of Contents for StorageWorks Director 2/64

Reviews:

Related manuals for StorageWorks Director 2/64

Brands by name

Popular brands

HP StorageWorks Director 2/64, Installation Manual

Search results

Summary of Contents for StorageWorks Director 2/64

Reviews:

Related manuals for StorageWorks Director 2/64

Brands by name

Popular brands