Installing and Configuring the Director
43
Director 2/64 Installation Guide
3
Pouch containing HP 9000, HP 10000, and HP 11000 Series
rack-mounting hardware:
■
Eight 10-32 x 0.375 in Phillips panhead screws—Installs
two shelf brackets to rails
■
Six 10-32 x 0.375 in Phillips panhead screws—Installs two
front mounting brackets to rails
■
Four 10-32 X 0.25 in Phillips countersunk screws—Installs
front brackets to switch
■
Ten 10-32 cage nuts—Secures front and rear shelf
brackets.
■
Four 0-32 x 0.375 in Phillips panhead screws—Installs rear
bracket sections
■
Four 10-32 X 0.25 in Phillips countersunk screws—Installs
rear mounting plates to chassis
■
Four 10-32 X 0.375 in Phillips panhead screws—Installs
two rear angle brackets
■
Eight square alignment washers
4
One cable management assembly
Table 4: Shipping Carton Contents for an HP 9000, HP 10000, and HP 11000
Series Rack (Continued)
Number
Item
