Installing and Configuring the Director
107
Director 2/64 Installation Guide
Deleting Alerts
Use the following steps to delete existing threshold alerts.
1. At the Hardware View page, choose Configure > Threshold Alerts. The
Configure Threshold Alerts dialog box displays.
2. Choose the alert that you want to delete by selecting the alert information in
the table and click Delete. A message displays asking you to confirm the
deletion.
3. Click Yes. The alert is removed from the dialog box.
Backing Up HAFM Configuration Data
It is important to back up the HAFM configuration data. This data is used to
restore the HAFM appliance operating environment in case of hard drive failure.
Refer to the HP StorageWorks HA-Fabric Manager Appliance Installation Guide
for instructions on backing up the HAFM configuration data.
Once the HAFM configuration data is backed up, go to “
Configuring Open Systems Management Server
For complete procedures on configuring this optional feature, refer to the HP
StorageWorks Director Element Manager User Guide.
Configuring FICON Management Server
For complete procedures on configuring this optional feature, refer to the HP
StorageWorks Director Element Manager User Guide.
Configuring Feature Key
For complete procedures on configuring this feature, refer to the HP
StorageWorks Director Element Manager User Guide.
