Installing and Configuring the Director 2/64
80
Director 2/64 Installation Guide
HAFM Server
To run HAFM software, you must set up and configure the HAFM server.
Refer to the HAFM server installation guide for instructions on:
■
Setting up the HAFM server.
■
Connecting the HAFM server to the LAN.
■
Configuring the network addressing for the HAFM server.
■
Setting HAFM server date and time.
■
Creating HAFM user names and passwords.
Enabling HAFM to Manage the Director
To manage a new director, it must be recognized by the HAFM application.
Follow these steps to enable HAFM to recognize a new director:
1. Click the Product menu and choose New from the drop-down menu. The
New Product dialog box displays, as shown in
Figure 36
.
Figure 36: New Product dialog box
2. Type the IP address you configured earlier. See “
Configure Director Network
Information
” on page 73 for more information.
3. Choose Director-64 from the Product Type drop-down list and click OK. A
new director icon displays at the Products View page.
4. Repeat this procedure for each new director.
