Installing and Configuring the Director 2/64
43
Director 2/64 Installation Guide
Select an Operating Location
Install the director in a secure or limited-access area to ensure that cable
connections are not compromised. Also, make sure to install the director in an
area with the necessary ventilation and power requirements.
Cooling and Power Requirements
Two fan modules, each containing three fans (six fans total), provide cooling and
redundancy fans for the director. The air intake for the director must satisfy an
operating environment temperature requirement of 40
°
F to 104°F (4
°
C to 40
°
C).
Director power requirements:
■
Input voltage: 100 to 120 or 200 to 240 VAC
■
Input frequency: 50/60 Hz
Caution:
Do not block Director 2/64 air vents. The switch uses ambient air for
cooling.
