manualshive.com logo in svg

HP StorageWorks 7110 - Virtual Array, Service Manual, Page: 34 / 164

Share
Download
HP StorageWorks 7110 - Virtual Array Service Manual Download Page 34

34 Product Overview

Power Modules

The disk enclosure is shipped with two fully redundant power modules. Each 

power module contains:

■

An autoranging power supply that converts ac input power to dc output 

power for use by the other array components. The power supplies share the 

power load under non-fault conditions. If one power supply fails, the other 

supply delivers the entire load to maintain power for the array. Each power 

supply uses a separate power cord. Both power supplies can be plugged 

into a common power source, or each supply can be plugged into a 

separate circuit to provide power source redundancy.

■

One internal blower, which provides airflow and maintains the proper 

operating temperature within the array enclosure. If the blower fails, a fault 

will occur. The other power module will continue to operate and its blower 

will continue to cool the enclosure. Even if a power supply fails, the blower 

within the power module will continue to operate; dc power for the blower 

is distributed from the midplane.

Summary of Contents for StorageWorks 7110 - Virtual Array





































































































































































Reviews:

No comments