manualshive.com logo in svg

HP StorageWorks 7110 - Virtual Array, Service Manual, Page: 30 / 164

Share
Download
HP StorageWorks 7110 - Virtual Array Service Manual Download Page 30

30 Product Overview

Link Controller Card (VA 7110/7400/7410 Only)

The link controller card (LCC) functions as a fiber optic transceiver for the disk 

enclosure. It allows up to six disk enclosures to be connected to the controller 

enclosure. Each LCC includes a Fibre Channel address switch, used to set the 

Fibre Channel loop address of the card. Each disk enclosure must have a 

unique address and both LCCs in a disk enclosure must be set to the same 

address. For cabling connections and switch settings, see 

Figure 8

 for the 

VA 7110, 

Figure 9

 for the VA 7400, and 

Figure 10

 for the VA 7410.

The LCC also monitors the operation of the disk enclosure and provides status 

information to the array controller. This includes what disks are present and 

their status, power supply status, and notification if the enclosure operating 

temperature has exceeded its limits.

Disk Drives

Up to 15 disks can be installed in each disk enclosure. The controller enclosure 

and the disk enclosure both use the same disk drives. See 

"Disk Drives" on 

page 26

.

Image Disks

The image disks can be located in either the controller enclosure or the disk 

enclosure. See 

"Image Disks" on page 27

.

Disk Drive Filler Panels

The controller enclosure and the disk enclosure both use the same disk drive 

filler panels. See 

"Disk Drive Filler Panels" on page 28

.

Summary of Contents for StorageWorks 7110 - Virtual Array





































































































































































Reviews:

No comments