HP StorageWorks 2/32 - SAN Switch User Manual Download Page 94

Page: 94 / 307

Switch Admin Window

Web Tools Version 3.1.x/4.1.x User Guide

Accessing the Switch Admin Window

Use the following steps to access the Switch Admin window.

1. Launch Web Tools by entering the desired IP address in a browser window.

The Switch Explorer appears.

2. Select a switch from the Fabric Tree.

The selected switch appears in the Switch View.

3. Select the Admin icon from the switch graphic. See “

Switch Graphic Buttons

”

on page 54.

The login dialog box appears.

4. Enter the admin user name and password.

5. Select the desired tab.

For reference information on the specific tabs, see the About and Using
sections of this chapter.

Summary of Contents for StorageWorks 2/32 - SAN Switch




















































































































































































































































































































Search results

Summary of Contents for StorageWorks 2/32 - SAN Switch

Reviews:

HP StorageWorks 2/32 - SAN Switch, User Manual, Page: 94 / 307

Search results

Summary of Contents for StorageWorks 2/32 - SAN Switch

Reviews: