manualshive.com logo in svg

HP StorageWorks 2/32 - SAN Switch, User Manual, Page: 38 / 307

Share
Download
HP StorageWorks 2/32 - SAN Switch User Manual Download Page 38

Installation

38

Web Tools Version 3.1.x/4.1.x User Guide

Installing Prerequisite Software on a Workstation

Perform the following steps before you use HP Web Tools to manage your fabric:

■

Install one of the supported web browsers on a workstation, if not already 
installed.

■

Configure the web browser for use with HP Web Tools.

■

Install the required Java Plug-in on the workstation, if not already installed. 
For some workstations, when you first access the switch using Web Tools, the 
operating system will automatically load the required Java Plug-in and JRE.

■

Install an HP Web Tools license on each switch to be managed from HP Web 
Tools. 

Installing a Web Browser

If not already installed, install one of the following browsers:

■

Internet Explorer 5.5 (with Service Pack 2 is highly recommended)

■

Netscape 4.77 for Solaris

Configuring the Web Browser

Specific browser settings are required for the correct operation of HP Web Tools 
with Netscape Communicator (not supported) or Internet Explorer. 

Configuring Netscape Communicator

Note:  

Due to decreasing customer demand and an increasing number of significant 

technical incompatibilities, the combination of the Netscape browser running on the 

Windows operating system is no longer supported for use with HP Web Tools.

Some browsers use local cache copies of .jar files and/or image files to improve 
performance (depending on the options selected in browser), which can cause 
incorrect display in HP Web Tools. The web browser cache must be cleared before 
invoking Web Tools. 

To remove cached files from Netscape Communicator:

1. Select Edit > Preferences. 

2. Click Advanced in the Category box to expand it, then click Cache.

Summary of Contents for StorageWorks 2/32 - SAN Switch




















































































































































































































































































































Reviews:

No comments