manualshive.com logo in svg

HP StorageWorks 2/32 - SAN Switch, User Manual, Page: 58 / 307

Share
Download
HP StorageWorks 2/32 - SAN Switch User Manual Download Page 58

Switch Explorer View

58

Web Tools Version 3.1.x/4.1.x User Guide

Status Legend

The Status Legend defines the meaning of colors visible in the background of the 
various icons in the Switch Explorer. 

Each color indicates a different operational state:

■

Green - Healthy

■

Yellow - Marginal (mix of good and faulty readings)

■

Red - Down (more than two faulty readings)

■

Gray - Unknown or unmonitored

■

Dark Gray - monitoring is being initiated.

If no data is available from a switch, the status is unmonitored and the switch 
displays as gray.

Note:  

For all status displays that are based on errors per time interval, any errors will 

cause the status to show faulty until the entire sample interval has passed.

Summary of Contents for StorageWorks 2/32 - SAN Switch




















































































































































































































































































































Reviews:

No comments