manualshive.com logo in svg

HP StorageWorks 2/32 - SAN Switch, User Manual, Page: 18 / 307

Share
Download
HP StorageWorks 2/32 - SAN Switch User Manual Download Page 18

About this Guide

18

Web Tools Version 3.1.x/4.1.x User Guide

Overview

This section covers the following topics:

■

Intended Audience

■

Related Documentation

Intended Audience

This book is intended for use by system administrators who are experienced with 
the following:

■

HP StorageWorks Fibre Channel SAN switches

■

Fabric Operating System V3.1.x or later

Related Documentation

For a list of related documents included with this product, see the Related 
Documents section of the Release Notes that came with your switch.

For the latest information, documentation, and firmware releases, please visit the 
following StorageWorks website: 

http://www.hp.com/country/us/eng/

prodserv/storage.html

For information about Fibre Channel standards, visit the Fibre Channel 
Association website, located at: 

http://www.fibrechannel.org

.

Summary of Contents for StorageWorks 2/32 - SAN Switch




















































































































































































































































































































Reviews:

No comments