HP StorageWorks 2/32 - SAN Switch User Manual Download Page 66

Page: 66 / 307

Switch Management

Web Tools Version 3.1.x/4.1.x User Guide

Using the Switch Status Button

To check the physical health of a switch, perform the following procedure.

1. Launch Web Tools.

2. View the background color (which shows the status) of the desired switch in

the Fabric Tree.

For further information, continue to the next step.

3. Click on the desired switch in the Fabric Tree.

The Switch View displays for that switch.

4. View the background color of the Status button. See the “

Status Legend

” on

page 58.

5. Click the Status button to view a written description of the health status.

Summary of Contents for StorageWorks 2/32 - SAN Switch




















































































































































































































































































































Search results

Summary of Contents for StorageWorks 2/32 - SAN Switch

Reviews:

HP StorageWorks 2/32 - SAN Switch, User Manual, Page: 66 / 307

Search results

Summary of Contents for StorageWorks 2/32 - SAN Switch

Reviews: