HP StorageWorks 2/32 - SAN Switch User Manual Download Page 93

Page: 93 / 307

Switch Admin Window

Web Tools Version 3.1.x/4.1.x User Guide

Click this button to exit the Admin Interface. If changes have

been made and not committed by clicking the Apply button,

a dialog box is presented. It allows the changes to be

committed or deleted.

Reset

Click this button to reset the field values to the last set of

committed changes. If the Apply button has not been pressed

on this tab, the parameters are returned to the original values

the tab contained when it was initially displayed.

Refresh

Click this button to receive the latest switch information.

Switch Commit

Messages

Refers to the small window at the bottom of each tab.

Displays a log regarding recent switch admin commit

changes.

Status Message

Appears in the bottom left corner of the tab; displays the type

of administrative interface being viewed.

Status Icon

Appears in the bottom right corner of the tab; refers to the

status of the switch. A green square means the switch is

enabled; a red square means the switch is disabled.

Table 17: Switch Admin Window Field Descriptions (Continued)

Field

Description

Summary of Contents for StorageWorks 2/32 - SAN Switch




















































































































































































































































































































Search results

Summary of Contents for StorageWorks 2/32 - SAN Switch

Reviews:

HP StorageWorks 2/32 - SAN Switch, User Manual, Page: 93 / 307

Search results

Summary of Contents for StorageWorks 2/32 - SAN Switch

Reviews: