HP StorageWorks 2/32 - SAN Switch User Manual Download Page 78

Page: 78 / 307

Switch Management

Web Tools Version 3.1.x/4.1.x User Guide

About the Switch Info Button

Use the Switch Info button (see “

Switch Graphic Buttons

” on page 54) of the

Switch View to display fundamental switch information such as the WWN, State,
and Ethernet IP address.

The Switch Info button fields are described in

Table 13

Table 13: Info Button Fields Descriptions

Field

Description

WWN

Displays the World Wide Name of the switch.

Domain ID

Displays the Domain ID of the switch (a unique number that

identifies the switch to the fabric and is used in routing

frames).

Role

Displays whether the switch is a Principal or Subordinate

switch in the fabric.

State

Displays the state of the switch, whether online or offline.

Firmware

Displays the current version of firmware loaded on the switch.

Manufacturer

Serial #

Displays the manufacturer serial number of the switch.

Supplier Serial #

Displays the supplier serial number of the switch, if

applicable.

Ether IP

Displays the Ethernet IP address.

Ether NM

Displays the Ethernet Mask

FC IP

Displays the Fibre Channel IP address, if one exists.

FC NM

Displays the Fibre Channel Mask, if one exists.

Gateway

Displays the Gateway address of the switch.

License ID

Displays the License ID of the switch. The license ID number is

required to get license keys for the switch.

Summary of Contents for StorageWorks 2/32 - SAN Switch




















































































































































































































































































































Search results

Summary of Contents for StorageWorks 2/32 - SAN Switch

Reviews:

HP StorageWorks 2/32 - SAN Switch, User Manual, Page: 78 / 307

Search results

Summary of Contents for StorageWorks 2/32 - SAN Switch

Reviews: