HP rp7400, Hardware Manual

Page: 132 / 162

rp7400 Server Boot up
132
3. Many selftest boot progress screens will be displayed. These will scroll rapidly up the screen. Some tests
may pause for up to one minute while the test completes.
The following abbreviated examples of the forward progress screens are typical of the screens displayed.
GSP Host Name: <HostName>
GSP>
********** VIRTUAL FRONT PANEL **********
System Boot detected
*****************************************
platform
config 626F
processor slave rendezvous 1C17
processor test 1142
processor test 1100
processor test 1100
processor test 1100
processor test 1100
processor test 1100
processor test 1100
processor test 1100
processor test 1100
processor INIT 1701
processor test 1120
processor slave rendezvous 1C40
processor test 1142
processor test 113B
platform test 612A
I/O config 8238
*****************************************
*************EARLY BOOT VFP *************
End of early boot detected
*****************************************
Firmware Version XX.XX
Duplex Console IO Dependent Code (IODC) revision 1
--------------------------------------------------------------------------
(c) Copyright 1995-1998, Hewlett-Packard Company, All rights reserved
--------------------------------------------------------------------------
Processor Speed State CoProcessor State Cache Size
Number State Inst Data
------- ------- ---------------- ----------------- ---- -----
1 440 MHz Active Functional 512 KB 1 MB
3 440 MHz Idle Functional 512 KB 1 MB
Central Bus Speed (in MHz) : 120
Available Memory : 2752512 KB
Good Memory Required : 10304 KB
Primary boot path: 0/0/2/0.6
Alternate boot path: 0/0/2/1.6
Console path: 0/0/4/0.0
Keyboard path: 0/0/4/0.0
WARNING: Memory subsystem address parity checking is disabled.
This has been disabled via a NVM control bit. This may have
been set manually. Or it may have been set automatically if
this system has 64 MB DIMMs, which do not consistently return
proper address parity.
Processor is booting from first available device.
To discontinue, press any key within 10 seconds.
Boot terminated.