HP ProCurve 4104GL, Management And Configuration Manual

Page: 373 / 504

14-23
HP Procurve Stack Management
Configuring Stack Management
4. To continue deleting the selected Member, press the Space bar once to
select
Yes for the prompt, then press
[Enter]
to complete the deletion. The
Stack Management screen updates to show the new stack Member list.
Using the Commander To Access Member Switches for
Configuration Changes and Monitoring Traffic
After a Candidate becomes a stack Member, you can use that stack’s
Commander to access the Member’s console interface for the same configu-
ration and monitoring that you would do through a Telnet or direct-connect
access.
1. From the Main Menu, select:
9. Stacking...
5. Stack Access
You will then see the Stack Access screen:
Figure 14-16. Example of the Stack Access Screen
Use the downarrow key to select the stack Member you want to access, then
press
[X]
(for
eXecute
) to display the console interface for the selected Member.
For example, if you selected switch number 1 (system name: Coral Sea ) in figure
14-16 and then pressed
[X]
, you would see the Main Menu for the switch named
Coral Sea.
For status descriptions, see the table on page 14-46.