HP ProCurve 4104GL, Management And Configuration Manual, Page: 298 / 504

12-10
Multimedia Traffic Control with IP Multicast (IGMP)
CLI: Configuring and Displaying IGMP
HPswitch
(vlan 1)# no ip igmp
Returns IGMP traffic to
high-priority-forward
“normal” priority.
HPswitch > show ip igmp config
Show command to display
results of above high-priority
commands.
Configuring the Querier Function. The default querier capability is
“enabled”. This command disables or re-enables the ability for the switch to
become querier if necessary.
Syntax:
[no] vlan <vid> ip igmp querier
Default:
Yes
HPswitch (config)# no vlan 1 ip
Disables the querier function
igmp querier
on VLAN 1.
HPswitch > show ip igmp config
Show command to display
results of above querier
command.
Web: Enabling or Disabling IGMP
In the web browser interface you can enable or disable IGMP on a per-VLAN
basis. To configure other IGMP features, telnet to the switch console and use
the CLI.
To Enable or Disable IGMP
1. Click on the Configuration tab.
2. Click on
[Device Features]
.
3. If more than one VLAN is configured, use the VLAN pull-down menu to
select the VLAN on which you want to enable or disable IGMP.
4. Use the Multicast Filtering (IGMP) menu to enable or disable IGMP.
5. Click on
[Apply Changes]
to implement the configuration change.
For web-based help on how to use the web browser interface screen, click on
the
[?]
button provided on the web browser screen.