HP Pavilion HDX9000 Maintenance And Service Manual Download Page 92

Page: 92 / 163

Remove the processor heat sink

(3)

NOTE:

Due to the adhesive quality of the thermal material located between the processor heat sink

and system board components, it may be necessary to move the processor heat sink from side to

side to detach it.

NOTE:

The thermal material must be thoroughly cleaned from the surfaces of the processor heat

sink

(1)

and the system board

(2)

each time the processor heat sink is removed. Thermal material

must be installed on all surfaces before the processor heat sink is reinstalled. Replacement thermal

material is included with all processor heat sink, system board, and processor spare part kits, and

is also available using spare part number 413706-001.

Reverse this procedure to install the processor heat sink.

84 Chapter

Removal and replacement procedures

Summary of Contents for Pavilion HDX9000




































































































































































Search results

Summary of Contents for Pavilion HDX9000

Reviews:

HP Pavilion HDX9000, Maintenance And Service Manual, Page: 92 / 163

Search results

Summary of Contents for Pavilion HDX9000

Reviews: