manualshive.com logo in svg

HP Pavilion HDX9000, Maintenance And Service Manual, Page: 52 / 163

Share
Download
HP Pavilion HDX9000 Maintenance And Service Manual Download Page 52

19

.

Squeeze the tabs on the display panel cable connector 

(2)

 together and disconnect the cable 

(3)

from the display panel.

20

.

Remove the display panel. The display panel is available using spare part numbers 452301-001

(20.1-inch, WSXGA+BrightView) and 452302-001 (20.1-inch, WUXGA).

21

.

If it is necessary to replace the speakers, disconnect the speaker cable connectors 

(1)

 from the

speaker extension cable connectors.

22

.

Remove the two Phillips PM2.5×5.0 screws 

(2)

 that secure each speaker to the display enclosure.

23

.

Remove the speakers 

(3)

. The speakers are available using spare part number 452310-001

Reverse this procedure to install the display bezel, camera module, display inverter, display panel, and

speakers.

44 Chapter 

4

   Removal and replacement procedures

Summary of Contents for Pavilion HDX9000




































































































































































Reviews:

No comments