
TV tuner module
Description
Spare part number
For use only in Europe, the Middle East, and Africa
448168-002
For use only in North America
448168-001
Before removing the TV tuner module, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4
.
Remove the battery (see
Battery on page 38
).
Remove the TV tuner module:
1
.
Position the computer with the front toward you.
2
.
Loosen the two black Phillips PM2.0×5.0 captive screws
(1)
that secure the TV tuner module
compartment cover to the computer.
3
.
Lift the left side of the TV tuner module compartment cover
(2)
, swing the cover up and to the right,
and remove the cover. The TV tuner module compartment cover is included in the Plastics Kit, spare
part number 448171-001.
4
.
Disconnect the TV tuner cable
(1)
from the TV tuner module.
5
.
Remove the two Phillips PM2.5×5.0 screws
(2)
that secure the TV tuner module to the system board.
(The edge of the module opposite the slot rises away from the computer.)
Component replacement procedures 49
Summary of Contents for Pavilion HDX9000
