Rear cover
Description
Spare part number
Rear cover
448161-001
Before removing the rear cover, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4
.
Remove the battery (see
Battery on page 38
).
5
.
Remove the hinge cover (see
Hinge cover on page 56
).
Remove the rear cover:
1
.
Position the computer with the front toward you.
2
.
Remove the seven Phillips PM2.5×8.0 screws
(1)
that secure the rear cover to the computer.
3
.
Remove the Mylar screw cover
(2)
in the optical drive bay. This screw cover is available in the Rubber
Feet Kit, spare part number 452320-001.
4
.
Remove the Phillips PM2.5×4.0 screw
(3)
that secures the rear cover to the computer.
5
.
Remove the four Phillips PM3.0×12.0 screws
(1)
that secure the rear cover to the computer.
Component replacement procedures 57
Summary of Contents for Pavilion HDX9000
