HP Pavilion HDX9000 Maintenance And Service Manual Download Page 22

Page: 22 / 163

Rear right-side components

Item

Component

Description

(1)

Left- and right-side analog channel output jack

Connects optional audio speakers for left- and right-side

audio output.

(2)

Rear left- and right-side analog channel output jack

Connects optional audio speakers for rear left- and right-side

audio output.

(3)

Center channel and subwoofer analog channel output

jack

Connects an optional audio speaker for center channel and

subwoofer audio output.

(4)

Front left- and right-side analog channel output jack

Connects optional audio speakers for front left- and right-side

audio output.

(5)

Vent

Enables airflow to cool internal components.

NOTE:

The computer fan starts up automatically to cool

internal components and prevent overheating. It is normal for

the internal fan to cycle on and off during routine operation.

(6)

Power connector

Connects an AC adapter.

14 Chapter

External component identification

Summary of Contents for Pavilion HDX9000




































































































































































Search results

Summary of Contents for Pavilion HDX9000

Reviews:

HP Pavilion HDX9000, Maintenance And Service Manual, Page: 22 / 163

Search results

Summary of Contents for Pavilion HDX9000

Reviews: