When replacing the system board, be sure that the following components are removed from the defective
system board and installed on the replacement system board:
●
Memory module (see
Memory module on page 50
)
●
RTC battery (see
RTC battery on page 81
)
●
WLAN module (see
WLAN module on page 47
)
Remove the system board:
1
.
Remove the power connector
(1)
from the clip built into the base enclosure.
2
.
Disconnect the rear USB board cable
(2)
and the power connector LED board cable
(3)
from the
system board.
Component replacement procedures 77
Summary of Contents for Pavilion HDX9000
