Audio connector board
Description
Spare part number
Audio connector board (includes cable)
452317-001
Before removing the audio connector board, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4
.
Remove the battery (see
Battery on page 38
).
5
.
Remove the following components:
a
.
Hard drive (see
Hard drive on page 45
)
b
.
Optical drive (see
Optical drive on page 52
)
c
.
Keyboard (see
Keyboard on page 54
)
d
.
Hinge cover (see
Hinge cover on page 56
)
e
.
Rear cover (see
Rear cover on page 57
)
f
.
Top cover (see
Top cover on page 59
)
g
.
Subwoofer (see
Subwoofer on page 72
)
h
.
System board (see
System board on page 76
)
Remove the audio connector board:
1
.
Remove the two Phillips PM2.5×5.0 screws
(1)
that secure the audio connector board to the base
enclosure.
2
.
Remove the audio connector board cable
(2)
from the clips built into the base enclosure.
80 Chapter
4
Removal and replacement procedures
Summary of Contents for Pavilion HDX9000
